Aritech Conventional

Arithech is new soluton for GE Safety system

 

2, 4 and 8 Zone Conventional Fire Panels

1X-F fire control panels offer state of the art architecture in configurations that deliver an uncomplicated solution for small to mid sized conventional applications. They feature an attractive contemporary design that fits with any decor. The gently curved door front offers a distinctive flair. Operator controls are inset in a striking black lexan. With support for multiple lines of conventional detectors and accessories, these quick-to-configure systems offer versatility that benefits building owners and installation/maintenance companies alike.

 3 Zone Conventional Fire and Extinguishing Panel

1X fire control panels offer state of the art architecture in configurations that deliver an uncomplicated solution for small to mid-sized conventional applications. They feature an attractive contemporary design that fits with any decor. The gently curved door front offers a distinctive flair. Operator controls are inset in a striking black lexan. With support for multiple lines of conventional detectors and accessories, these quick-to-configure systems offer versatility that benefits building owners and installation/maintenance companies alike.

Photoelectric smoke detector with remote alarm LED output

All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the EN54 sensitivity limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber as well as the internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.

Photoelectric smoke detector with C/O relay output

All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the EN54 sensitivity limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber as well as the internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.

Photoelectric smoke and heat detector with relay output

All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the EN54 sensitivity limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber as well as the internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.

700 Series conventional multi-sensor with remote indicator output

All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the EN54 sensitivity limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber as well as the internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.

57ºC Fixed and rate-of-rise heat detector

700 Series smoke detectors continually monitor their own sensitivity and operational status. The temperature detectors in the line consist of two models: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 56°C and built in rate-or-rise functionality. It has a variant in the DT713-5R which has the same specifications but in addition includes a built in, potential free changeover relay. The DT713-7 is a class B temperature detector with a fix temperature threshold of 70°C and built in rate-or-rise functionality.

57ºC Fixed and R.O.R. heat detector, with relay output

700 Series smoke detectors continually monitor their own sensitivity and operational status. The temperature detectors in the line consist of two models: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 56°C and built in rate-or-rise functionality. It has a variant in the DT713-5R which has the same specifications but in addition includes a built in, potential free changeover relay. The DT713-7 is a class B temperature detector with a fix temperature threshold of 70°C and built in rate-or-rise functionality.

70ºC Fixed and R.O.R. heat detector

700 Series smoke detectors continually monitor their own sensitivity and operational status. The temperature detectors in the line consist of two models: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 56°C and built in rate-or-rise functionality. It has a variant in the DT713-5R which has the same specifications but in addition includes a built in, potential free changeover relay. The DT713-7 is a class B temperature detector with a fix temperature threshold of 70°C and built in rate-or-rise functionality.

10 cm diameter base - 6 terminals

The DB702 is a conventional fire detector base used for all 700 series conventional fire detectors. It includes a normally closed continuity switch to allow for easy cable testing during installation. Inserting a detector into the base “opens” the continuity switch in the base to allow for standard open circuit monitoring. A locking mechanism implementation in conjunction with the detector allows for the detector to be safeguarded against unauthorized removal.

15 cm diameter base - 6 terminals

The DB702U is a large rim conventional fire detector base used for all 700 series conventional fire detectors. It includes a normally closed continuity switch to allow for easy cable testing during installation. Inserting a detector into the base “opens” the continuity switch in the base to allow for standard open circuit monitoring. A locking mechanism implementation in conjunction with the detector allows for the detector to be safeguarded against unauthorized removal.

Battery powered standalone smoke detector with sounder - EN approved

The 560 Series battery powered smoke detectors with on board sounders offer solutions for all stand-alone applications. All detectors feature a local silence and test function. In addition the 562NSE also carries full EN14604 approval. All detectors are shipped with a dust cover for protection in dusty environments during installation, as well as a detector base for ease of installation. Batteries are supplied with the unit.

Manual callpoint, surface mount, red, 100 ohm and free contact, resetable

DMN700Y is a yellow manual call point for flush mount applications. It offers a single pole, changeover contact with common, normally open and normally closed connections. It is supplied with a EN54 breakable glass and test key. Surface mount applications require the addition of the DM788Y or DMN787Y.

Manual callpoint, flush mount, red, 560 ohm and free contact, break glass, LED

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.

Manual Callpoint, Red, 100 ohm, Free Contact, Outdoor, Surface Mount, Resetable

The DMN700E100 is a weather proof MCP, designed for outdoor application with an IP67 ingress protection rating. It comes with snap on connections, which ensure ease of installation and maintenance. Assembly of the unit is also made easy with a simple snap on fit, and 4 screws to secure the unit.

Manual callpoint, flush mount, red, free contact, break glass

The DMN700-EVAC is a red manual call point for flush mount applications. It offers a single pole, changeover contact with common, normally open and normally closed connections. It is supplied with a EN54 breakable glass and test key. Surface mount applications require the addition of the DM788 or DMN787.

Manual callpoint, flush mount, yellow, free contact, break glass

DMN700Y is a yellow manual call point for flush mount applications. It offers a single pole, changeover contact with common, normally open and normally closed connections. It is supplied with a EN54 breakable glass and test key. Surface mount applications require the addition of the DM788Y or DMN787Y.

Fire sounder, multi tone, shallow base

The AS363 is a general purpose electronic sounder for fire alarm applications. Which features a special base containing all wiring connections and allow for easy removal/placement of the sounder.